Alignment of various blocks in tikzRotate a node but not its content: the case of the ellipse decorationHow...

Aligning equation numbers vertically

What are the steps to solving this definite integral?

Elements that can bond to themselves?

Map of water taps to fill bottles

Minor Revision with suggestion of an alternative proof by reviewer

What's the polite way to say "I need to urinate"?

Checks user level and limit the data before saving it to mongoDB

"Hidden" theta-term in Hamiltonian formulation of Yang-Mills theory

How would 10 generations of living underground change the human body?

Re-entry to Germany after vacation using blue card

Constructions of PRF (Pseudo Random Function)

Multiple options vs single option UI

Alignment of various blocks in tikz

Coordinate my way to the name of the (video) game

Which big number is bigger?

How do I reattach a shelf to the wall when it ripped out of the wall?

Who was the lone kid in the line of people at the lake at the end of Avengers: Endgame?

can anyone help me with this awful query plan?

How to limit Drive Letters Windows assigns to new removable USB drives

Pulling the rope with one hand is as heavy as with two hands?

Can an Area of Effect spell cast outside a Prismatic Wall extend inside it?

Pre-plastic human skin alternative

Is there any official lore on the Far Realm?

How to not starve gigantic beasts



Alignment of various blocks in tikz


Rotate a node but not its content: the case of the ellipse decorationHow to evenly space out nodes or in tikz?How to define the default vertical distance between nodes?Numerical conditional within tikz keys?use circuitikz picture inside tikzpictureTikz: Lining up input and output nodes in multiple input multiple output diagramTikZ: Drawing an arc from an intersection to an intersectionSpecial connexion with a node (TikZ)Line up nested tikz enviroments or how to get rid of themSpace between containers and arrow from block to container













8















As you can see the left side of the 3 lower blocks are moved to the right while keeping their right sides aligned with the right side of the first block.



sample image



I'm using the following code:



documentclass[tikz,border=3.14mm]{standalone}
usepackage{tikz}
usetikzlibrary{positioning}
usetikzlibrary{decorations.markings}
begin{document}

begin{tikzpicture}[auto, node distance=2cm,>=latex,block/.style={draw, fill=white, rectangle,
minimum height=3em, minimum width=6em}]
node[block] (A) {$frac{1}{sT_E}$};
node[circle, draw, left =of A] (B) {$Sigma$};
node[circle, draw, right =of A] (C) {$Pi$};
node[rectangle, below=0.5cm of A] (D) {$V_{Emin}$};
node[block, below=1.12 of C] (E) {$F_{EX}=f(l_N)$};
node[block, anchor=0.8, below=.5cm of D] (G) {$S_E(V_E)$};
%node[block, below right=.5cm and 1.1cm of G] (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
node[rectangle, above=.5 of A] (J) {$frac{V_{FEmax}-K_Dcdot l_{FD}}{K_E+S_E(V_E)}$};
node[block, below=.5cm of G] (H) {$K_E$};
node[block, below=.5cm of H] (I) {$K_D$};
node[block] at (H -| E) (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
node[circle, draw, left=1 of H] (K) {$Sigma$};
%
draw[->] (A) -- (B);
draw[->] (A) -- node[pos=0.5,above]{$V_E$} (C);
draw[->] (C.0) -- ++ (1,0) node[pos=0.5,above] {$E_{FD}$};
draw[<-] (B.180) -- ++ (-1,0) node[pos=0.5,above] {$E_{FE}$};
draw[-] (A) -- (J.-40);
draw[-] (J.-40) -- ++ (0.6,0);
draw[-] (A) -- (D.140);
draw[-] (D.140) -- ++ (-0.6,0);
draw[->] (E) -- node[pos=0.5,right] {$F_{EX}$} (C);
draw[->] (F) -- node[pos=0.5,right] {$l_{N}$} (E);
draw[->] (A.0) -- ++ (0.6,0) |- (H.0);
draw[->] (A.0) -- ++ (0.6,0) |- (F.180);
draw[<-] (I.0) -- ++ (3.75,0) node[pos=0.8,below] {$I_{FD}$};
draw[->] (I.0) -| (F.270) ;
end{tikzpicture}
end{document}









share|improve this question









New contributor




Nip is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
















  • 2





    Welcome to the site. What code are you attempting to use to obtain the result? You are expected to provide a minimum (non)working example to help use see your approach.

    – Steven B. Segletes
    6 hours ago








  • 1





    ill edit my post.

    – Nip
    6 hours ago
















8















As you can see the left side of the 3 lower blocks are moved to the right while keeping their right sides aligned with the right side of the first block.



sample image



I'm using the following code:



documentclass[tikz,border=3.14mm]{standalone}
usepackage{tikz}
usetikzlibrary{positioning}
usetikzlibrary{decorations.markings}
begin{document}

begin{tikzpicture}[auto, node distance=2cm,>=latex,block/.style={draw, fill=white, rectangle,
minimum height=3em, minimum width=6em}]
node[block] (A) {$frac{1}{sT_E}$};
node[circle, draw, left =of A] (B) {$Sigma$};
node[circle, draw, right =of A] (C) {$Pi$};
node[rectangle, below=0.5cm of A] (D) {$V_{Emin}$};
node[block, below=1.12 of C] (E) {$F_{EX}=f(l_N)$};
node[block, anchor=0.8, below=.5cm of D] (G) {$S_E(V_E)$};
%node[block, below right=.5cm and 1.1cm of G] (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
node[rectangle, above=.5 of A] (J) {$frac{V_{FEmax}-K_Dcdot l_{FD}}{K_E+S_E(V_E)}$};
node[block, below=.5cm of G] (H) {$K_E$};
node[block, below=.5cm of H] (I) {$K_D$};
node[block] at (H -| E) (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
node[circle, draw, left=1 of H] (K) {$Sigma$};
%
draw[->] (A) -- (B);
draw[->] (A) -- node[pos=0.5,above]{$V_E$} (C);
draw[->] (C.0) -- ++ (1,0) node[pos=0.5,above] {$E_{FD}$};
draw[<-] (B.180) -- ++ (-1,0) node[pos=0.5,above] {$E_{FE}$};
draw[-] (A) -- (J.-40);
draw[-] (J.-40) -- ++ (0.6,0);
draw[-] (A) -- (D.140);
draw[-] (D.140) -- ++ (-0.6,0);
draw[->] (E) -- node[pos=0.5,right] {$F_{EX}$} (C);
draw[->] (F) -- node[pos=0.5,right] {$l_{N}$} (E);
draw[->] (A.0) -- ++ (0.6,0) |- (H.0);
draw[->] (A.0) -- ++ (0.6,0) |- (F.180);
draw[<-] (I.0) -- ++ (3.75,0) node[pos=0.8,below] {$I_{FD}$};
draw[->] (I.0) -| (F.270) ;
end{tikzpicture}
end{document}









share|improve this question









New contributor




Nip is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
















  • 2





    Welcome to the site. What code are you attempting to use to obtain the result? You are expected to provide a minimum (non)working example to help use see your approach.

    – Steven B. Segletes
    6 hours ago








  • 1





    ill edit my post.

    – Nip
    6 hours ago














8












8








8


1






As you can see the left side of the 3 lower blocks are moved to the right while keeping their right sides aligned with the right side of the first block.



sample image



I'm using the following code:



documentclass[tikz,border=3.14mm]{standalone}
usepackage{tikz}
usetikzlibrary{positioning}
usetikzlibrary{decorations.markings}
begin{document}

begin{tikzpicture}[auto, node distance=2cm,>=latex,block/.style={draw, fill=white, rectangle,
minimum height=3em, minimum width=6em}]
node[block] (A) {$frac{1}{sT_E}$};
node[circle, draw, left =of A] (B) {$Sigma$};
node[circle, draw, right =of A] (C) {$Pi$};
node[rectangle, below=0.5cm of A] (D) {$V_{Emin}$};
node[block, below=1.12 of C] (E) {$F_{EX}=f(l_N)$};
node[block, anchor=0.8, below=.5cm of D] (G) {$S_E(V_E)$};
%node[block, below right=.5cm and 1.1cm of G] (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
node[rectangle, above=.5 of A] (J) {$frac{V_{FEmax}-K_Dcdot l_{FD}}{K_E+S_E(V_E)}$};
node[block, below=.5cm of G] (H) {$K_E$};
node[block, below=.5cm of H] (I) {$K_D$};
node[block] at (H -| E) (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
node[circle, draw, left=1 of H] (K) {$Sigma$};
%
draw[->] (A) -- (B);
draw[->] (A) -- node[pos=0.5,above]{$V_E$} (C);
draw[->] (C.0) -- ++ (1,0) node[pos=0.5,above] {$E_{FD}$};
draw[<-] (B.180) -- ++ (-1,0) node[pos=0.5,above] {$E_{FE}$};
draw[-] (A) -- (J.-40);
draw[-] (J.-40) -- ++ (0.6,0);
draw[-] (A) -- (D.140);
draw[-] (D.140) -- ++ (-0.6,0);
draw[->] (E) -- node[pos=0.5,right] {$F_{EX}$} (C);
draw[->] (F) -- node[pos=0.5,right] {$l_{N}$} (E);
draw[->] (A.0) -- ++ (0.6,0) |- (H.0);
draw[->] (A.0) -- ++ (0.6,0) |- (F.180);
draw[<-] (I.0) -- ++ (3.75,0) node[pos=0.8,below] {$I_{FD}$};
draw[->] (I.0) -| (F.270) ;
end{tikzpicture}
end{document}









share|improve this question









New contributor




Nip is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.












As you can see the left side of the 3 lower blocks are moved to the right while keeping their right sides aligned with the right side of the first block.



sample image



I'm using the following code:



documentclass[tikz,border=3.14mm]{standalone}
usepackage{tikz}
usetikzlibrary{positioning}
usetikzlibrary{decorations.markings}
begin{document}

begin{tikzpicture}[auto, node distance=2cm,>=latex,block/.style={draw, fill=white, rectangle,
minimum height=3em, minimum width=6em}]
node[block] (A) {$frac{1}{sT_E}$};
node[circle, draw, left =of A] (B) {$Sigma$};
node[circle, draw, right =of A] (C) {$Pi$};
node[rectangle, below=0.5cm of A] (D) {$V_{Emin}$};
node[block, below=1.12 of C] (E) {$F_{EX}=f(l_N)$};
node[block, anchor=0.8, below=.5cm of D] (G) {$S_E(V_E)$};
%node[block, below right=.5cm and 1.1cm of G] (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
node[rectangle, above=.5 of A] (J) {$frac{V_{FEmax}-K_Dcdot l_{FD}}{K_E+S_E(V_E)}$};
node[block, below=.5cm of G] (H) {$K_E$};
node[block, below=.5cm of H] (I) {$K_D$};
node[block] at (H -| E) (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
node[circle, draw, left=1 of H] (K) {$Sigma$};
%
draw[->] (A) -- (B);
draw[->] (A) -- node[pos=0.5,above]{$V_E$} (C);
draw[->] (C.0) -- ++ (1,0) node[pos=0.5,above] {$E_{FD}$};
draw[<-] (B.180) -- ++ (-1,0) node[pos=0.5,above] {$E_{FE}$};
draw[-] (A) -- (J.-40);
draw[-] (J.-40) -- ++ (0.6,0);
draw[-] (A) -- (D.140);
draw[-] (D.140) -- ++ (-0.6,0);
draw[->] (E) -- node[pos=0.5,right] {$F_{EX}$} (C);
draw[->] (F) -- node[pos=0.5,right] {$l_{N}$} (E);
draw[->] (A.0) -- ++ (0.6,0) |- (H.0);
draw[->] (A.0) -- ++ (0.6,0) |- (F.180);
draw[<-] (I.0) -- ++ (3.75,0) node[pos=0.8,below] {$I_{FD}$};
draw[->] (I.0) -| (F.270) ;
end{tikzpicture}
end{document}






tikz-pgf tikz-styles tikz-arrows tikz-trees






share|improve this question









New contributor




Nip is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question









New contributor




Nip is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question








edited 45 mins ago









Jonathan

1286




1286






New contributor




Nip is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked 6 hours ago









NipNip

436




436




New contributor




Nip is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





Nip is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






Nip is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.








  • 2





    Welcome to the site. What code are you attempting to use to obtain the result? You are expected to provide a minimum (non)working example to help use see your approach.

    – Steven B. Segletes
    6 hours ago








  • 1





    ill edit my post.

    – Nip
    6 hours ago














  • 2





    Welcome to the site. What code are you attempting to use to obtain the result? You are expected to provide a minimum (non)working example to help use see your approach.

    – Steven B. Segletes
    6 hours ago








  • 1





    ill edit my post.

    – Nip
    6 hours ago








2




2





Welcome to the site. What code are you attempting to use to obtain the result? You are expected to provide a minimum (non)working example to help use see your approach.

– Steven B. Segletes
6 hours ago







Welcome to the site. What code are you attempting to use to obtain the result? You are expected to provide a minimum (non)working example to help use see your approach.

– Steven B. Segletes
6 hours ago






1




1





ill edit my post.

– Nip
6 hours ago





ill edit my post.

– Nip
6 hours ago










2 Answers
2






active

oldest

votes


















5














You can always overwrite default settings.



documentclass[tikz,border=3.14mm]{standalone}
usepackage{tikz}
usetikzlibrary{positioning}
usetikzlibrary{decorations.markings}
begin{document}

begin{tikzpicture}[auto, node distance=2cm,>=latex,block/.style={draw, fill=white, rectangle,
minimum height=3em, minimum width=6em}]
node[block] (A) {$frac{1}{sT_E}$};
node[circle, draw, left =of A] (B) {$Sigma$};
node[circle, draw, right =of A] (C) {$Pi$};
node[rectangle, below=0.5cm of A] (D) {$V_{Emin}$};
node[block, below=1.12 of C] (E) {$F_{EX}=f(l_N)$};
node[block,minimum width=5em,xshift=.5em,anchor=0.8, below=.5cm of D] (G) {$S_E(V_E)$};
%node[block, below right=.5cm and 1.1cm of G] (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
node[rectangle, above=.5 of A] (J) {$frac{V_{FEmax}-K_Dcdot l_{FD}}{K_E+S_E(V_E)}$};
node[block,minimum width=5em, below=.5cm of G] (H) {$K_E$};
node[block,minimum width=5em, below=.5cm of H] (I) {$K_D$};
node[block] at (H -| E) (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
node[circle, draw, left=1 of H] (K) {$Sigma$};
%
draw[->] (A) -- (B);
draw[->] (A) -- node[pos=0.5,above]{$V_E$} (C);
draw[->] (C.0) -- ++ (1,0) node[pos=0.5,above] {$E_{FD}$};
draw[<-] (B.180) -- ++ (-1,0) node[pos=0.5,above] {$E_{FE}$};
draw[-] (A) -- (J.-40);
draw[-] (J.-40) -- ++ (0.6,0);
draw[-] (A) -- (D.140);
draw[-] (D.140) -- ++ (-0.6,0);
draw[->] (E) -- node[pos=0.5,right] {$F_{EX}$} (C);
draw[->] (F) -- node[pos=0.5,right] {$l_{N}$} (E);
draw[->] (A.0) -- ++ (0.6,0) |- (H.0);
draw[->] (A.0) -- ++ (0.6,0) |- (F.180);
draw[<-] (I.0) -- ++ (3.75,0) node[pos=0.8,below] {$I_{FD}$};
draw[->] (I.0) -| (F.270) ;
end{tikzpicture}
end{document}


enter image description here



Code explanation:




  • I change minimum width to 5em in the three lower nodes.

  • However, as the nodes are centered, I shift the first one of the three nodes. The other two are automatically shifted correctly.






share|improve this answer
























  • Thank you! It works perfectly!

    – Nip
    4 hours ago



















9














an alternative, with using TikZ libraries calc (for calculation of middle points on edges), positioning (for positioning of nodes) and quotes (for edge labels), and the nccmath packages (for medium size of fractions). redefined are also styles for nodes:



documentclass[tikz,border=3.14mm]{standalone}
usetikzlibrary{calc,
positioning,
quotes}
usepackage{nccmath}
newcommandmi[1]{mathit{#1}}

begin{document}
begin{tikzpicture}[auto,
node distance=4mm and 22mm,
>=latex,
block/.style = {draw, fill=white, minimum size=9mm, minimum width=#1},
block/.default = 16mm,
Circ/.style = {circle, draw, minimum size=2em, inner sep=1pt}
]
node (A) [block=22mm] {$frac{1}{sT_E}$};
node (B) [Circ, left =of A] {$Sigma$};
node (C) [Circ, right=of A] {$Pi$};
node (D) [below=5mm of A] {$V_{E_{min}}$};
node (J) [above=5mm of A] {$mfrac{V_{mi{FE}_{max}}-K_Dcdot l_{mi{FD}}}
{K_E+S_E(V_E)}$};
draw[-] (A.west |- D.north) -- ++ ( 0.6,0) -- (A)
(A.east |- J.south) -- ++ (-0.6,0) -- (A);
node (E) [block, below=of C |- D] {$F_{mi{EX}}=f(l_N)$};
node (G) [block,
below left= 0mm of A.east |- E.west] {$S_E(V_E)$};
node (H) [block, below=of G] {$K_E$};
node (I) [block, below=of H] {$K_D$};
node (F) [block, at={(H -| E)}] {$l_N=K_Cmfrac{l_{FD}}{V_E}$};
node (K) [Circ] at ($(B |- H)!0.5!(H.west)$) {$Sigma$};
%
coordinate[left=1 of B] (in);
coordinate (aux) at ($(H.east)!0.5!(F.west)$);
draw[->] (in) edge["$E_{mi{FE}}$"] (B)
(A) edge (B)
(A) edge["$V_E$"] (C)
(C.0) edge["$E_{mi{FD}}$"] ++ (1,0)
(E) edge["$F_{mi{EX}}$"] (C)
(F) edge["$l_{N}$"] (E)
(F.east |- I) edge[near start,"$I_{FD}$"] (I)
(A -| aux) -- (aux) edge (H)
(aux) edge (F)
(F |- I) to (F);
end{tikzpicture}
end{document}


enter image description here






share|improve this answer


























    Your Answer








    StackExchange.ready(function() {
    var channelOptions = {
    tags: "".split(" "),
    id: "85"
    };
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function() {
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled) {
    StackExchange.using("snippets", function() {
    createEditor();
    });
    }
    else {
    createEditor();
    }
    });

    function createEditor() {
    StackExchange.prepareEditor({
    heartbeatType: 'answer',
    autoActivateHeartbeat: false,
    convertImagesToLinks: false,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: null,
    bindNavPrevention: true,
    postfix: "",
    imageUploader: {
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    },
    onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    });


    }
    });






    Nip is a new contributor. Be nice, and check out our Code of Conduct.










    draft saved

    draft discarded


















    StackExchange.ready(
    function () {
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f487784%2falignment-of-various-blocks-in-tikz%23new-answer', 'question_page');
    }
    );

    Post as a guest















    Required, but never shown

























    2 Answers
    2






    active

    oldest

    votes








    2 Answers
    2






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    5














    You can always overwrite default settings.



    documentclass[tikz,border=3.14mm]{standalone}
    usepackage{tikz}
    usetikzlibrary{positioning}
    usetikzlibrary{decorations.markings}
    begin{document}

    begin{tikzpicture}[auto, node distance=2cm,>=latex,block/.style={draw, fill=white, rectangle,
    minimum height=3em, minimum width=6em}]
    node[block] (A) {$frac{1}{sT_E}$};
    node[circle, draw, left =of A] (B) {$Sigma$};
    node[circle, draw, right =of A] (C) {$Pi$};
    node[rectangle, below=0.5cm of A] (D) {$V_{Emin}$};
    node[block, below=1.12 of C] (E) {$F_{EX}=f(l_N)$};
    node[block,minimum width=5em,xshift=.5em,anchor=0.8, below=.5cm of D] (G) {$S_E(V_E)$};
    %node[block, below right=.5cm and 1.1cm of G] (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
    node[rectangle, above=.5 of A] (J) {$frac{V_{FEmax}-K_Dcdot l_{FD}}{K_E+S_E(V_E)}$};
    node[block,minimum width=5em, below=.5cm of G] (H) {$K_E$};
    node[block,minimum width=5em, below=.5cm of H] (I) {$K_D$};
    node[block] at (H -| E) (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
    node[circle, draw, left=1 of H] (K) {$Sigma$};
    %
    draw[->] (A) -- (B);
    draw[->] (A) -- node[pos=0.5,above]{$V_E$} (C);
    draw[->] (C.0) -- ++ (1,0) node[pos=0.5,above] {$E_{FD}$};
    draw[<-] (B.180) -- ++ (-1,0) node[pos=0.5,above] {$E_{FE}$};
    draw[-] (A) -- (J.-40);
    draw[-] (J.-40) -- ++ (0.6,0);
    draw[-] (A) -- (D.140);
    draw[-] (D.140) -- ++ (-0.6,0);
    draw[->] (E) -- node[pos=0.5,right] {$F_{EX}$} (C);
    draw[->] (F) -- node[pos=0.5,right] {$l_{N}$} (E);
    draw[->] (A.0) -- ++ (0.6,0) |- (H.0);
    draw[->] (A.0) -- ++ (0.6,0) |- (F.180);
    draw[<-] (I.0) -- ++ (3.75,0) node[pos=0.8,below] {$I_{FD}$};
    draw[->] (I.0) -| (F.270) ;
    end{tikzpicture}
    end{document}


    enter image description here



    Code explanation:




    • I change minimum width to 5em in the three lower nodes.

    • However, as the nodes are centered, I shift the first one of the three nodes. The other two are automatically shifted correctly.






    share|improve this answer
























    • Thank you! It works perfectly!

      – Nip
      4 hours ago
















    5














    You can always overwrite default settings.



    documentclass[tikz,border=3.14mm]{standalone}
    usepackage{tikz}
    usetikzlibrary{positioning}
    usetikzlibrary{decorations.markings}
    begin{document}

    begin{tikzpicture}[auto, node distance=2cm,>=latex,block/.style={draw, fill=white, rectangle,
    minimum height=3em, minimum width=6em}]
    node[block] (A) {$frac{1}{sT_E}$};
    node[circle, draw, left =of A] (B) {$Sigma$};
    node[circle, draw, right =of A] (C) {$Pi$};
    node[rectangle, below=0.5cm of A] (D) {$V_{Emin}$};
    node[block, below=1.12 of C] (E) {$F_{EX}=f(l_N)$};
    node[block,minimum width=5em,xshift=.5em,anchor=0.8, below=.5cm of D] (G) {$S_E(V_E)$};
    %node[block, below right=.5cm and 1.1cm of G] (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
    node[rectangle, above=.5 of A] (J) {$frac{V_{FEmax}-K_Dcdot l_{FD}}{K_E+S_E(V_E)}$};
    node[block,minimum width=5em, below=.5cm of G] (H) {$K_E$};
    node[block,minimum width=5em, below=.5cm of H] (I) {$K_D$};
    node[block] at (H -| E) (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
    node[circle, draw, left=1 of H] (K) {$Sigma$};
    %
    draw[->] (A) -- (B);
    draw[->] (A) -- node[pos=0.5,above]{$V_E$} (C);
    draw[->] (C.0) -- ++ (1,0) node[pos=0.5,above] {$E_{FD}$};
    draw[<-] (B.180) -- ++ (-1,0) node[pos=0.5,above] {$E_{FE}$};
    draw[-] (A) -- (J.-40);
    draw[-] (J.-40) -- ++ (0.6,0);
    draw[-] (A) -- (D.140);
    draw[-] (D.140) -- ++ (-0.6,0);
    draw[->] (E) -- node[pos=0.5,right] {$F_{EX}$} (C);
    draw[->] (F) -- node[pos=0.5,right] {$l_{N}$} (E);
    draw[->] (A.0) -- ++ (0.6,0) |- (H.0);
    draw[->] (A.0) -- ++ (0.6,0) |- (F.180);
    draw[<-] (I.0) -- ++ (3.75,0) node[pos=0.8,below] {$I_{FD}$};
    draw[->] (I.0) -| (F.270) ;
    end{tikzpicture}
    end{document}


    enter image description here



    Code explanation:




    • I change minimum width to 5em in the three lower nodes.

    • However, as the nodes are centered, I shift the first one of the three nodes. The other two are automatically shifted correctly.






    share|improve this answer
























    • Thank you! It works perfectly!

      – Nip
      4 hours ago














    5












    5








    5







    You can always overwrite default settings.



    documentclass[tikz,border=3.14mm]{standalone}
    usepackage{tikz}
    usetikzlibrary{positioning}
    usetikzlibrary{decorations.markings}
    begin{document}

    begin{tikzpicture}[auto, node distance=2cm,>=latex,block/.style={draw, fill=white, rectangle,
    minimum height=3em, minimum width=6em}]
    node[block] (A) {$frac{1}{sT_E}$};
    node[circle, draw, left =of A] (B) {$Sigma$};
    node[circle, draw, right =of A] (C) {$Pi$};
    node[rectangle, below=0.5cm of A] (D) {$V_{Emin}$};
    node[block, below=1.12 of C] (E) {$F_{EX}=f(l_N)$};
    node[block,minimum width=5em,xshift=.5em,anchor=0.8, below=.5cm of D] (G) {$S_E(V_E)$};
    %node[block, below right=.5cm and 1.1cm of G] (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
    node[rectangle, above=.5 of A] (J) {$frac{V_{FEmax}-K_Dcdot l_{FD}}{K_E+S_E(V_E)}$};
    node[block,minimum width=5em, below=.5cm of G] (H) {$K_E$};
    node[block,minimum width=5em, below=.5cm of H] (I) {$K_D$};
    node[block] at (H -| E) (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
    node[circle, draw, left=1 of H] (K) {$Sigma$};
    %
    draw[->] (A) -- (B);
    draw[->] (A) -- node[pos=0.5,above]{$V_E$} (C);
    draw[->] (C.0) -- ++ (1,0) node[pos=0.5,above] {$E_{FD}$};
    draw[<-] (B.180) -- ++ (-1,0) node[pos=0.5,above] {$E_{FE}$};
    draw[-] (A) -- (J.-40);
    draw[-] (J.-40) -- ++ (0.6,0);
    draw[-] (A) -- (D.140);
    draw[-] (D.140) -- ++ (-0.6,0);
    draw[->] (E) -- node[pos=0.5,right] {$F_{EX}$} (C);
    draw[->] (F) -- node[pos=0.5,right] {$l_{N}$} (E);
    draw[->] (A.0) -- ++ (0.6,0) |- (H.0);
    draw[->] (A.0) -- ++ (0.6,0) |- (F.180);
    draw[<-] (I.0) -- ++ (3.75,0) node[pos=0.8,below] {$I_{FD}$};
    draw[->] (I.0) -| (F.270) ;
    end{tikzpicture}
    end{document}


    enter image description here



    Code explanation:




    • I change minimum width to 5em in the three lower nodes.

    • However, as the nodes are centered, I shift the first one of the three nodes. The other two are automatically shifted correctly.






    share|improve this answer













    You can always overwrite default settings.



    documentclass[tikz,border=3.14mm]{standalone}
    usepackage{tikz}
    usetikzlibrary{positioning}
    usetikzlibrary{decorations.markings}
    begin{document}

    begin{tikzpicture}[auto, node distance=2cm,>=latex,block/.style={draw, fill=white, rectangle,
    minimum height=3em, minimum width=6em}]
    node[block] (A) {$frac{1}{sT_E}$};
    node[circle, draw, left =of A] (B) {$Sigma$};
    node[circle, draw, right =of A] (C) {$Pi$};
    node[rectangle, below=0.5cm of A] (D) {$V_{Emin}$};
    node[block, below=1.12 of C] (E) {$F_{EX}=f(l_N)$};
    node[block,minimum width=5em,xshift=.5em,anchor=0.8, below=.5cm of D] (G) {$S_E(V_E)$};
    %node[block, below right=.5cm and 1.1cm of G] (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
    node[rectangle, above=.5 of A] (J) {$frac{V_{FEmax}-K_Dcdot l_{FD}}{K_E+S_E(V_E)}$};
    node[block,minimum width=5em, below=.5cm of G] (H) {$K_E$};
    node[block,minimum width=5em, below=.5cm of H] (I) {$K_D$};
    node[block] at (H -| E) (F) {$l_N=K_Ccdotfrac{l_{FD}}{V_E}$};
    node[circle, draw, left=1 of H] (K) {$Sigma$};
    %
    draw[->] (A) -- (B);
    draw[->] (A) -- node[pos=0.5,above]{$V_E$} (C);
    draw[->] (C.0) -- ++ (1,0) node[pos=0.5,above] {$E_{FD}$};
    draw[<-] (B.180) -- ++ (-1,0) node[pos=0.5,above] {$E_{FE}$};
    draw[-] (A) -- (J.-40);
    draw[-] (J.-40) -- ++ (0.6,0);
    draw[-] (A) -- (D.140);
    draw[-] (D.140) -- ++ (-0.6,0);
    draw[->] (E) -- node[pos=0.5,right] {$F_{EX}$} (C);
    draw[->] (F) -- node[pos=0.5,right] {$l_{N}$} (E);
    draw[->] (A.0) -- ++ (0.6,0) |- (H.0);
    draw[->] (A.0) -- ++ (0.6,0) |- (F.180);
    draw[<-] (I.0) -- ++ (3.75,0) node[pos=0.8,below] {$I_{FD}$};
    draw[->] (I.0) -| (F.270) ;
    end{tikzpicture}
    end{document}


    enter image description here



    Code explanation:




    • I change minimum width to 5em in the three lower nodes.

    • However, as the nodes are centered, I shift the first one of the three nodes. The other two are automatically shifted correctly.







    share|improve this answer












    share|improve this answer



    share|improve this answer










    answered 6 hours ago









    JouleVJouleV

    16.1k22667




    16.1k22667













    • Thank you! It works perfectly!

      – Nip
      4 hours ago



















    • Thank you! It works perfectly!

      – Nip
      4 hours ago

















    Thank you! It works perfectly!

    – Nip
    4 hours ago





    Thank you! It works perfectly!

    – Nip
    4 hours ago











    9














    an alternative, with using TikZ libraries calc (for calculation of middle points on edges), positioning (for positioning of nodes) and quotes (for edge labels), and the nccmath packages (for medium size of fractions). redefined are also styles for nodes:



    documentclass[tikz,border=3.14mm]{standalone}
    usetikzlibrary{calc,
    positioning,
    quotes}
    usepackage{nccmath}
    newcommandmi[1]{mathit{#1}}

    begin{document}
    begin{tikzpicture}[auto,
    node distance=4mm and 22mm,
    >=latex,
    block/.style = {draw, fill=white, minimum size=9mm, minimum width=#1},
    block/.default = 16mm,
    Circ/.style = {circle, draw, minimum size=2em, inner sep=1pt}
    ]
    node (A) [block=22mm] {$frac{1}{sT_E}$};
    node (B) [Circ, left =of A] {$Sigma$};
    node (C) [Circ, right=of A] {$Pi$};
    node (D) [below=5mm of A] {$V_{E_{min}}$};
    node (J) [above=5mm of A] {$mfrac{V_{mi{FE}_{max}}-K_Dcdot l_{mi{FD}}}
    {K_E+S_E(V_E)}$};
    draw[-] (A.west |- D.north) -- ++ ( 0.6,0) -- (A)
    (A.east |- J.south) -- ++ (-0.6,0) -- (A);
    node (E) [block, below=of C |- D] {$F_{mi{EX}}=f(l_N)$};
    node (G) [block,
    below left= 0mm of A.east |- E.west] {$S_E(V_E)$};
    node (H) [block, below=of G] {$K_E$};
    node (I) [block, below=of H] {$K_D$};
    node (F) [block, at={(H -| E)}] {$l_N=K_Cmfrac{l_{FD}}{V_E}$};
    node (K) [Circ] at ($(B |- H)!0.5!(H.west)$) {$Sigma$};
    %
    coordinate[left=1 of B] (in);
    coordinate (aux) at ($(H.east)!0.5!(F.west)$);
    draw[->] (in) edge["$E_{mi{FE}}$"] (B)
    (A) edge (B)
    (A) edge["$V_E$"] (C)
    (C.0) edge["$E_{mi{FD}}$"] ++ (1,0)
    (E) edge["$F_{mi{EX}}$"] (C)
    (F) edge["$l_{N}$"] (E)
    (F.east |- I) edge[near start,"$I_{FD}$"] (I)
    (A -| aux) -- (aux) edge (H)
    (aux) edge (F)
    (F |- I) to (F);
    end{tikzpicture}
    end{document}


    enter image description here






    share|improve this answer






























      9














      an alternative, with using TikZ libraries calc (for calculation of middle points on edges), positioning (for positioning of nodes) and quotes (for edge labels), and the nccmath packages (for medium size of fractions). redefined are also styles for nodes:



      documentclass[tikz,border=3.14mm]{standalone}
      usetikzlibrary{calc,
      positioning,
      quotes}
      usepackage{nccmath}
      newcommandmi[1]{mathit{#1}}

      begin{document}
      begin{tikzpicture}[auto,
      node distance=4mm and 22mm,
      >=latex,
      block/.style = {draw, fill=white, minimum size=9mm, minimum width=#1},
      block/.default = 16mm,
      Circ/.style = {circle, draw, minimum size=2em, inner sep=1pt}
      ]
      node (A) [block=22mm] {$frac{1}{sT_E}$};
      node (B) [Circ, left =of A] {$Sigma$};
      node (C) [Circ, right=of A] {$Pi$};
      node (D) [below=5mm of A] {$V_{E_{min}}$};
      node (J) [above=5mm of A] {$mfrac{V_{mi{FE}_{max}}-K_Dcdot l_{mi{FD}}}
      {K_E+S_E(V_E)}$};
      draw[-] (A.west |- D.north) -- ++ ( 0.6,0) -- (A)
      (A.east |- J.south) -- ++ (-0.6,0) -- (A);
      node (E) [block, below=of C |- D] {$F_{mi{EX}}=f(l_N)$};
      node (G) [block,
      below left= 0mm of A.east |- E.west] {$S_E(V_E)$};
      node (H) [block, below=of G] {$K_E$};
      node (I) [block, below=of H] {$K_D$};
      node (F) [block, at={(H -| E)}] {$l_N=K_Cmfrac{l_{FD}}{V_E}$};
      node (K) [Circ] at ($(B |- H)!0.5!(H.west)$) {$Sigma$};
      %
      coordinate[left=1 of B] (in);
      coordinate (aux) at ($(H.east)!0.5!(F.west)$);
      draw[->] (in) edge["$E_{mi{FE}}$"] (B)
      (A) edge (B)
      (A) edge["$V_E$"] (C)
      (C.0) edge["$E_{mi{FD}}$"] ++ (1,0)
      (E) edge["$F_{mi{EX}}$"] (C)
      (F) edge["$l_{N}$"] (E)
      (F.east |- I) edge[near start,"$I_{FD}$"] (I)
      (A -| aux) -- (aux) edge (H)
      (aux) edge (F)
      (F |- I) to (F);
      end{tikzpicture}
      end{document}


      enter image description here






      share|improve this answer




























        9












        9








        9







        an alternative, with using TikZ libraries calc (for calculation of middle points on edges), positioning (for positioning of nodes) and quotes (for edge labels), and the nccmath packages (for medium size of fractions). redefined are also styles for nodes:



        documentclass[tikz,border=3.14mm]{standalone}
        usetikzlibrary{calc,
        positioning,
        quotes}
        usepackage{nccmath}
        newcommandmi[1]{mathit{#1}}

        begin{document}
        begin{tikzpicture}[auto,
        node distance=4mm and 22mm,
        >=latex,
        block/.style = {draw, fill=white, minimum size=9mm, minimum width=#1},
        block/.default = 16mm,
        Circ/.style = {circle, draw, minimum size=2em, inner sep=1pt}
        ]
        node (A) [block=22mm] {$frac{1}{sT_E}$};
        node (B) [Circ, left =of A] {$Sigma$};
        node (C) [Circ, right=of A] {$Pi$};
        node (D) [below=5mm of A] {$V_{E_{min}}$};
        node (J) [above=5mm of A] {$mfrac{V_{mi{FE}_{max}}-K_Dcdot l_{mi{FD}}}
        {K_E+S_E(V_E)}$};
        draw[-] (A.west |- D.north) -- ++ ( 0.6,0) -- (A)
        (A.east |- J.south) -- ++ (-0.6,0) -- (A);
        node (E) [block, below=of C |- D] {$F_{mi{EX}}=f(l_N)$};
        node (G) [block,
        below left= 0mm of A.east |- E.west] {$S_E(V_E)$};
        node (H) [block, below=of G] {$K_E$};
        node (I) [block, below=of H] {$K_D$};
        node (F) [block, at={(H -| E)}] {$l_N=K_Cmfrac{l_{FD}}{V_E}$};
        node (K) [Circ] at ($(B |- H)!0.5!(H.west)$) {$Sigma$};
        %
        coordinate[left=1 of B] (in);
        coordinate (aux) at ($(H.east)!0.5!(F.west)$);
        draw[->] (in) edge["$E_{mi{FE}}$"] (B)
        (A) edge (B)
        (A) edge["$V_E$"] (C)
        (C.0) edge["$E_{mi{FD}}$"] ++ (1,0)
        (E) edge["$F_{mi{EX}}$"] (C)
        (F) edge["$l_{N}$"] (E)
        (F.east |- I) edge[near start,"$I_{FD}$"] (I)
        (A -| aux) -- (aux) edge (H)
        (aux) edge (F)
        (F |- I) to (F);
        end{tikzpicture}
        end{document}


        enter image description here






        share|improve this answer















        an alternative, with using TikZ libraries calc (for calculation of middle points on edges), positioning (for positioning of nodes) and quotes (for edge labels), and the nccmath packages (for medium size of fractions). redefined are also styles for nodes:



        documentclass[tikz,border=3.14mm]{standalone}
        usetikzlibrary{calc,
        positioning,
        quotes}
        usepackage{nccmath}
        newcommandmi[1]{mathit{#1}}

        begin{document}
        begin{tikzpicture}[auto,
        node distance=4mm and 22mm,
        >=latex,
        block/.style = {draw, fill=white, minimum size=9mm, minimum width=#1},
        block/.default = 16mm,
        Circ/.style = {circle, draw, minimum size=2em, inner sep=1pt}
        ]
        node (A) [block=22mm] {$frac{1}{sT_E}$};
        node (B) [Circ, left =of A] {$Sigma$};
        node (C) [Circ, right=of A] {$Pi$};
        node (D) [below=5mm of A] {$V_{E_{min}}$};
        node (J) [above=5mm of A] {$mfrac{V_{mi{FE}_{max}}-K_Dcdot l_{mi{FD}}}
        {K_E+S_E(V_E)}$};
        draw[-] (A.west |- D.north) -- ++ ( 0.6,0) -- (A)
        (A.east |- J.south) -- ++ (-0.6,0) -- (A);
        node (E) [block, below=of C |- D] {$F_{mi{EX}}=f(l_N)$};
        node (G) [block,
        below left= 0mm of A.east |- E.west] {$S_E(V_E)$};
        node (H) [block, below=of G] {$K_E$};
        node (I) [block, below=of H] {$K_D$};
        node (F) [block, at={(H -| E)}] {$l_N=K_Cmfrac{l_{FD}}{V_E}$};
        node (K) [Circ] at ($(B |- H)!0.5!(H.west)$) {$Sigma$};
        %
        coordinate[left=1 of B] (in);
        coordinate (aux) at ($(H.east)!0.5!(F.west)$);
        draw[->] (in) edge["$E_{mi{FE}}$"] (B)
        (A) edge (B)
        (A) edge["$V_E$"] (C)
        (C.0) edge["$E_{mi{FD}}$"] ++ (1,0)
        (E) edge["$F_{mi{EX}}$"] (C)
        (F) edge["$l_{N}$"] (E)
        (F.east |- I) edge[near start,"$I_{FD}$"] (I)
        (A -| aux) -- (aux) edge (H)
        (aux) edge (F)
        (F |- I) to (F);
        end{tikzpicture}
        end{document}


        enter image description here







        share|improve this answer














        share|improve this answer



        share|improve this answer








        edited 1 hour ago

























        answered 4 hours ago









        ZarkoZarko

        131k870170




        131k870170






















            Nip is a new contributor. Be nice, and check out our Code of Conduct.










            draft saved

            draft discarded


















            Nip is a new contributor. Be nice, and check out our Code of Conduct.













            Nip is a new contributor. Be nice, and check out our Code of Conduct.












            Nip is a new contributor. Be nice, and check out our Code of Conduct.
















            Thanks for contributing an answer to TeX - LaTeX Stack Exchange!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f487784%2falignment-of-various-blocks-in-tikz%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            Popular posts from this blog

            “%fieldName is a required field.”, in Magento2 REST API Call for GET Method Type The Next...

            How to change City field to a dropdown in Checkout step Magento 2Magento 2 : How to change UI field(s)...

            變成蝙蝠會怎樣? 參考資料 外部連結 导航菜单Thomas Nagel, "What is it like to be a...