Sampling Theorem and reconstructionSampling frequency required to detect peaksSampling TheoremWhy is the...

Can I use my Chinese passport to enter China after I acquired another citizenship?

Are lightweight LN wallets vulnerable to transaction withholding?

Is camera lens focus an exact point or a range?

How to align and center standalone amsmath equations?

What's the difference between 違法 and 不法?

Bob has never been a M before

Visiting the UK as unmarried couple

Have I saved too much for retirement so far?

MAXDOP Settings for SQL Server 2014

Did arcade monitors have same pixel aspect ratio as TV sets?

A social experiment. What is the worst that can happen?

Drawing ramified coverings with tikz

What (else) happened July 1st 1858 in London?

How should I respond when I lied about my education and the company finds out through background check?

Translation of Scottish 16th century church stained glass

Could the E-bike drivetrain wear down till needing replacement after 400 km?

Journal losing indexing services

Why did the EU agree to delay the Brexit deadline?

Two-sided logarithm inequality

Open a doc from terminal, but not by its name

Longest common substring in linear time

How can "mimic phobia" be cured or prevented?

Drawing a topological "handle" with Tikz

Has Darkwing Duck ever met Scrooge McDuck?



Sampling Theorem and reconstruction


Sampling frequency required to detect peaksSampling TheoremWhy is the voltage in this digitizer reducedWhy do digital scopes sample signals at a higher frequency than required by the sampling theorem?Fast Fourier Transformation of incomplete signalsSampling rate for a real signal, which is not band-limited?Am I using Shannon-Hartley Theorem and thermal noise correctly here?What is the difference between modulating with cosine and exponential function?Confusion with Nyquist theorem when sampling cosines versus sinesregarding the sampling frequence













2












$begingroup$


I do not understand a concept about the Nyquist - Shannon sampling theorem.



It says that it is possibile to perfectly get the original analog signal from the signal obtained by sampling if and only if the sampling frequency is higher than twice the maximum frequency of the initial signal.



I can understand it if I think at what happens in the frequency domain, in which the sampling produces replicas of the initial spectrum and therefore a low pass filter reconstructor can delete them and keep the original spectrum.



But in time domain sampling simply means to extract values of the original signal at instants separated by the sampling time T.



enter image description here



Once I have extracted these values, I have lost all the informations about the points between two consecutive instants of sampling. How can the reconstructor device perfectly obtain the original signal? It does not know how to connect the sampled points (they can be connected by infinite mathematical curves and all the information inside T time are lost). For example, it can connect them as in figure 1 (the correct original signal), or as in figure 2.



figure 1



enter image description here



figure 2



enter image description here



This makes me think that a very high sampling frequency is surely a good thing, since the points are very close together, but there is not a frequency that if overcome, allows a 100% perfect reconstruction, since sampling implies losing information.










share|improve this question









$endgroup$








  • 2




    $begingroup$
    Your bottom signal has some much higher frequency components than the other ones here.
    $endgroup$
    – Hearth
    4 hours ago






  • 3




    $begingroup$
    There is exactly ONE curve that passes thru all those points AND is band limited to strictly less then Fs/2.
    $endgroup$
    – Dan Mills
    4 hours ago










  • $begingroup$
    it's important to note that unique reconstruction is only possible if the original signal is strictly bandlimited. Or to put it another way, given the samples, the assumption of strict bandlimiting allows a single signal to be reconstructed. To the extent that the bandlimited assumption is untrue, then the reconstructed signal will not match the original - this is called aliasing.
    $endgroup$
    – Neil_UK
    3 hours ago










  • $begingroup$
    Also note that in practice it may require higher sampling frequency to provide acceptable reconstruction since perfect band-limiting are not practical. For example Audio CDs use 44.1kHz sampling to provide 0-20kHz output. Oscilloscopes generally use 5-10 times the required minimum sampling frequency to provide acceptable waveform integrity as a sharp cutoff filter would tend to create waveform artifacts such as ringing.
    $endgroup$
    – Kevin White
    2 hours ago
















2












$begingroup$


I do not understand a concept about the Nyquist - Shannon sampling theorem.



It says that it is possibile to perfectly get the original analog signal from the signal obtained by sampling if and only if the sampling frequency is higher than twice the maximum frequency of the initial signal.



I can understand it if I think at what happens in the frequency domain, in which the sampling produces replicas of the initial spectrum and therefore a low pass filter reconstructor can delete them and keep the original spectrum.



But in time domain sampling simply means to extract values of the original signal at instants separated by the sampling time T.



enter image description here



Once I have extracted these values, I have lost all the informations about the points between two consecutive instants of sampling. How can the reconstructor device perfectly obtain the original signal? It does not know how to connect the sampled points (they can be connected by infinite mathematical curves and all the information inside T time are lost). For example, it can connect them as in figure 1 (the correct original signal), or as in figure 2.



figure 1



enter image description here



figure 2



enter image description here



This makes me think that a very high sampling frequency is surely a good thing, since the points are very close together, but there is not a frequency that if overcome, allows a 100% perfect reconstruction, since sampling implies losing information.










share|improve this question









$endgroup$








  • 2




    $begingroup$
    Your bottom signal has some much higher frequency components than the other ones here.
    $endgroup$
    – Hearth
    4 hours ago






  • 3




    $begingroup$
    There is exactly ONE curve that passes thru all those points AND is band limited to strictly less then Fs/2.
    $endgroup$
    – Dan Mills
    4 hours ago










  • $begingroup$
    it's important to note that unique reconstruction is only possible if the original signal is strictly bandlimited. Or to put it another way, given the samples, the assumption of strict bandlimiting allows a single signal to be reconstructed. To the extent that the bandlimited assumption is untrue, then the reconstructed signal will not match the original - this is called aliasing.
    $endgroup$
    – Neil_UK
    3 hours ago










  • $begingroup$
    Also note that in practice it may require higher sampling frequency to provide acceptable reconstruction since perfect band-limiting are not practical. For example Audio CDs use 44.1kHz sampling to provide 0-20kHz output. Oscilloscopes generally use 5-10 times the required minimum sampling frequency to provide acceptable waveform integrity as a sharp cutoff filter would tend to create waveform artifacts such as ringing.
    $endgroup$
    – Kevin White
    2 hours ago














2












2








2





$begingroup$


I do not understand a concept about the Nyquist - Shannon sampling theorem.



It says that it is possibile to perfectly get the original analog signal from the signal obtained by sampling if and only if the sampling frequency is higher than twice the maximum frequency of the initial signal.



I can understand it if I think at what happens in the frequency domain, in which the sampling produces replicas of the initial spectrum and therefore a low pass filter reconstructor can delete them and keep the original spectrum.



But in time domain sampling simply means to extract values of the original signal at instants separated by the sampling time T.



enter image description here



Once I have extracted these values, I have lost all the informations about the points between two consecutive instants of sampling. How can the reconstructor device perfectly obtain the original signal? It does not know how to connect the sampled points (they can be connected by infinite mathematical curves and all the information inside T time are lost). For example, it can connect them as in figure 1 (the correct original signal), or as in figure 2.



figure 1



enter image description here



figure 2



enter image description here



This makes me think that a very high sampling frequency is surely a good thing, since the points are very close together, but there is not a frequency that if overcome, allows a 100% perfect reconstruction, since sampling implies losing information.










share|improve this question









$endgroup$




I do not understand a concept about the Nyquist - Shannon sampling theorem.



It says that it is possibile to perfectly get the original analog signal from the signal obtained by sampling if and only if the sampling frequency is higher than twice the maximum frequency of the initial signal.



I can understand it if I think at what happens in the frequency domain, in which the sampling produces replicas of the initial spectrum and therefore a low pass filter reconstructor can delete them and keep the original spectrum.



But in time domain sampling simply means to extract values of the original signal at instants separated by the sampling time T.



enter image description here



Once I have extracted these values, I have lost all the informations about the points between two consecutive instants of sampling. How can the reconstructor device perfectly obtain the original signal? It does not know how to connect the sampled points (they can be connected by infinite mathematical curves and all the information inside T time are lost). For example, it can connect them as in figure 1 (the correct original signal), or as in figure 2.



figure 1



enter image description here



figure 2



enter image description here



This makes me think that a very high sampling frequency is surely a good thing, since the points are very close together, but there is not a frequency that if overcome, allows a 100% perfect reconstruction, since sampling implies losing information.







analog signal signal-processing sampling signal-theory






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked 4 hours ago









Kinka-ByoKinka-Byo

512




512








  • 2




    $begingroup$
    Your bottom signal has some much higher frequency components than the other ones here.
    $endgroup$
    – Hearth
    4 hours ago






  • 3




    $begingroup$
    There is exactly ONE curve that passes thru all those points AND is band limited to strictly less then Fs/2.
    $endgroup$
    – Dan Mills
    4 hours ago










  • $begingroup$
    it's important to note that unique reconstruction is only possible if the original signal is strictly bandlimited. Or to put it another way, given the samples, the assumption of strict bandlimiting allows a single signal to be reconstructed. To the extent that the bandlimited assumption is untrue, then the reconstructed signal will not match the original - this is called aliasing.
    $endgroup$
    – Neil_UK
    3 hours ago










  • $begingroup$
    Also note that in practice it may require higher sampling frequency to provide acceptable reconstruction since perfect band-limiting are not practical. For example Audio CDs use 44.1kHz sampling to provide 0-20kHz output. Oscilloscopes generally use 5-10 times the required minimum sampling frequency to provide acceptable waveform integrity as a sharp cutoff filter would tend to create waveform artifacts such as ringing.
    $endgroup$
    – Kevin White
    2 hours ago














  • 2




    $begingroup$
    Your bottom signal has some much higher frequency components than the other ones here.
    $endgroup$
    – Hearth
    4 hours ago






  • 3




    $begingroup$
    There is exactly ONE curve that passes thru all those points AND is band limited to strictly less then Fs/2.
    $endgroup$
    – Dan Mills
    4 hours ago










  • $begingroup$
    it's important to note that unique reconstruction is only possible if the original signal is strictly bandlimited. Or to put it another way, given the samples, the assumption of strict bandlimiting allows a single signal to be reconstructed. To the extent that the bandlimited assumption is untrue, then the reconstructed signal will not match the original - this is called aliasing.
    $endgroup$
    – Neil_UK
    3 hours ago










  • $begingroup$
    Also note that in practice it may require higher sampling frequency to provide acceptable reconstruction since perfect band-limiting are not practical. For example Audio CDs use 44.1kHz sampling to provide 0-20kHz output. Oscilloscopes generally use 5-10 times the required minimum sampling frequency to provide acceptable waveform integrity as a sharp cutoff filter would tend to create waveform artifacts such as ringing.
    $endgroup$
    – Kevin White
    2 hours ago








2




2




$begingroup$
Your bottom signal has some much higher frequency components than the other ones here.
$endgroup$
– Hearth
4 hours ago




$begingroup$
Your bottom signal has some much higher frequency components than the other ones here.
$endgroup$
– Hearth
4 hours ago




3




3




$begingroup$
There is exactly ONE curve that passes thru all those points AND is band limited to strictly less then Fs/2.
$endgroup$
– Dan Mills
4 hours ago




$begingroup$
There is exactly ONE curve that passes thru all those points AND is band limited to strictly less then Fs/2.
$endgroup$
– Dan Mills
4 hours ago












$begingroup$
it's important to note that unique reconstruction is only possible if the original signal is strictly bandlimited. Or to put it another way, given the samples, the assumption of strict bandlimiting allows a single signal to be reconstructed. To the extent that the bandlimited assumption is untrue, then the reconstructed signal will not match the original - this is called aliasing.
$endgroup$
– Neil_UK
3 hours ago




$begingroup$
it's important to note that unique reconstruction is only possible if the original signal is strictly bandlimited. Or to put it another way, given the samples, the assumption of strict bandlimiting allows a single signal to be reconstructed. To the extent that the bandlimited assumption is untrue, then the reconstructed signal will not match the original - this is called aliasing.
$endgroup$
– Neil_UK
3 hours ago












$begingroup$
Also note that in practice it may require higher sampling frequency to provide acceptable reconstruction since perfect band-limiting are not practical. For example Audio CDs use 44.1kHz sampling to provide 0-20kHz output. Oscilloscopes generally use 5-10 times the required minimum sampling frequency to provide acceptable waveform integrity as a sharp cutoff filter would tend to create waveform artifacts such as ringing.
$endgroup$
– Kevin White
2 hours ago




$begingroup$
Also note that in practice it may require higher sampling frequency to provide acceptable reconstruction since perfect band-limiting are not practical. For example Audio CDs use 44.1kHz sampling to provide 0-20kHz output. Oscilloscopes generally use 5-10 times the required minimum sampling frequency to provide acceptable waveform integrity as a sharp cutoff filter would tend to create waveform artifacts such as ringing.
$endgroup$
– Kevin White
2 hours ago










2 Answers
2






active

oldest

votes


















2












$begingroup$

You can think of any perfectly bandlimited signal as the superposition of a set of $frac{sin(t)}{t} = text{sinc}(t)$ curves, with their peaks positioned uniformly along the time axis. Their spacing is $frac{2}{BW}$.



sinc(x) also happens to be the time-domain response of a perfect low-pass filter, and it explains how the continuous-time reconstruction (interpolation) is accomplished from a series of discrete samples.



When we uniformly sample a signal, each sample is a direct measurement of the amplitude of one of those sinc() waves. This works because it is a property of the sinc() function that it is zero at every sampling point, except at its own peak. In other words, when you take a measurement, you're not getting any "interference" from any of the other sinc() functions. Therefore, the set of N discrete measurements contains all of the information in the continuous-time signal represented by that collection of sinc() waves.





Now, it gets even weirder than what TimWestcott was alluding to — the samples do not even have to be uniformly spaced in time! It turns out that ANY N unique samples taken within a window of time (with certain limitations) of a perfectly bandlimited signal can be used to reconstruct that signal. It takes a lot more math to do it, though!



With nonuniform sampling, you are no longer getting a clean measurement of just one of the sinc() amplitudes. Instead, you're getting a mix of many, if not all of them. However, since you know exactly where you are on each one (obviously, each sample must be time-stamped), it is possible to solve the large system of linear equations to find the actual amplitudes and therefore reconstruct the original signal. Of course, this process is very sensitive to small perturbations (noise and math errors, for example), and I'm hand-waving away some details about constraints on the set of samples, but the general principle holds.






share|improve this answer









$endgroup$





















    0












    $begingroup$

    If the signal is perfectly bandlimited, then there is no additional information to be gotten out of it by sampling faster than twice the bandwidth. So perfect reconstruction must be possible. It's as @DanMills said: there's one and only one curve that'll pass through the sampled points and be correct, and that's the curve that you'd get from a perfect reconstruction filter.



    (Note that it gets weirder -- at least in theory, if the bandwidth is $B$, then you don't need to sample $x(t)$ at $2B$ -- you can sample $x(t)$ and $frac{d x(t)}{dt}$ simultaneously at $B$, or sample out to the third derivative (i.e., collect four samples) at $frac{B}{2}$, or commit various other crimes to the signal before sampling an $N$ wide vector at $frac{2B}{N}$. Most such schemes (definitely the derivatives that I mention) would be horribly impractical, but in theory they'll work, and you do occasionally stumble across schemes that are actually used in reality.)






    share|improve this answer









    $endgroup$













    • $begingroup$
      Why band - limiting means there is one e only one curves that will pass through the sampled points?
      $endgroup$
      – Kinka-Byo
      19 mins ago











    Your Answer





    StackExchange.ifUsing("editor", function () {
    return StackExchange.using("mathjaxEditing", function () {
    StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
    StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
    });
    });
    }, "mathjax-editing");

    StackExchange.ifUsing("editor", function () {
    return StackExchange.using("schematics", function () {
    StackExchange.schematics.init();
    });
    }, "cicuitlab");

    StackExchange.ready(function() {
    var channelOptions = {
    tags: "".split(" "),
    id: "135"
    };
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function() {
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled) {
    StackExchange.using("snippets", function() {
    createEditor();
    });
    }
    else {
    createEditor();
    }
    });

    function createEditor() {
    StackExchange.prepareEditor({
    heartbeatType: 'answer',
    autoActivateHeartbeat: false,
    convertImagesToLinks: false,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: null,
    bindNavPrevention: true,
    postfix: "",
    imageUploader: {
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    },
    onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    });


    }
    });














    draft saved

    draft discarded


















    StackExchange.ready(
    function () {
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f428871%2fsampling-theorem-and-reconstruction%23new-answer', 'question_page');
    }
    );

    Post as a guest















    Required, but never shown

























    2 Answers
    2






    active

    oldest

    votes








    2 Answers
    2






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    2












    $begingroup$

    You can think of any perfectly bandlimited signal as the superposition of a set of $frac{sin(t)}{t} = text{sinc}(t)$ curves, with their peaks positioned uniformly along the time axis. Their spacing is $frac{2}{BW}$.



    sinc(x) also happens to be the time-domain response of a perfect low-pass filter, and it explains how the continuous-time reconstruction (interpolation) is accomplished from a series of discrete samples.



    When we uniformly sample a signal, each sample is a direct measurement of the amplitude of one of those sinc() waves. This works because it is a property of the sinc() function that it is zero at every sampling point, except at its own peak. In other words, when you take a measurement, you're not getting any "interference" from any of the other sinc() functions. Therefore, the set of N discrete measurements contains all of the information in the continuous-time signal represented by that collection of sinc() waves.





    Now, it gets even weirder than what TimWestcott was alluding to — the samples do not even have to be uniformly spaced in time! It turns out that ANY N unique samples taken within a window of time (with certain limitations) of a perfectly bandlimited signal can be used to reconstruct that signal. It takes a lot more math to do it, though!



    With nonuniform sampling, you are no longer getting a clean measurement of just one of the sinc() amplitudes. Instead, you're getting a mix of many, if not all of them. However, since you know exactly where you are on each one (obviously, each sample must be time-stamped), it is possible to solve the large system of linear equations to find the actual amplitudes and therefore reconstruct the original signal. Of course, this process is very sensitive to small perturbations (noise and math errors, for example), and I'm hand-waving away some details about constraints on the set of samples, but the general principle holds.






    share|improve this answer









    $endgroup$


















      2












      $begingroup$

      You can think of any perfectly bandlimited signal as the superposition of a set of $frac{sin(t)}{t} = text{sinc}(t)$ curves, with their peaks positioned uniformly along the time axis. Their spacing is $frac{2}{BW}$.



      sinc(x) also happens to be the time-domain response of a perfect low-pass filter, and it explains how the continuous-time reconstruction (interpolation) is accomplished from a series of discrete samples.



      When we uniformly sample a signal, each sample is a direct measurement of the amplitude of one of those sinc() waves. This works because it is a property of the sinc() function that it is zero at every sampling point, except at its own peak. In other words, when you take a measurement, you're not getting any "interference" from any of the other sinc() functions. Therefore, the set of N discrete measurements contains all of the information in the continuous-time signal represented by that collection of sinc() waves.





      Now, it gets even weirder than what TimWestcott was alluding to — the samples do not even have to be uniformly spaced in time! It turns out that ANY N unique samples taken within a window of time (with certain limitations) of a perfectly bandlimited signal can be used to reconstruct that signal. It takes a lot more math to do it, though!



      With nonuniform sampling, you are no longer getting a clean measurement of just one of the sinc() amplitudes. Instead, you're getting a mix of many, if not all of them. However, since you know exactly where you are on each one (obviously, each sample must be time-stamped), it is possible to solve the large system of linear equations to find the actual amplitudes and therefore reconstruct the original signal. Of course, this process is very sensitive to small perturbations (noise and math errors, for example), and I'm hand-waving away some details about constraints on the set of samples, but the general principle holds.






      share|improve this answer









      $endgroup$
















        2












        2








        2





        $begingroup$

        You can think of any perfectly bandlimited signal as the superposition of a set of $frac{sin(t)}{t} = text{sinc}(t)$ curves, with their peaks positioned uniformly along the time axis. Their spacing is $frac{2}{BW}$.



        sinc(x) also happens to be the time-domain response of a perfect low-pass filter, and it explains how the continuous-time reconstruction (interpolation) is accomplished from a series of discrete samples.



        When we uniformly sample a signal, each sample is a direct measurement of the amplitude of one of those sinc() waves. This works because it is a property of the sinc() function that it is zero at every sampling point, except at its own peak. In other words, when you take a measurement, you're not getting any "interference" from any of the other sinc() functions. Therefore, the set of N discrete measurements contains all of the information in the continuous-time signal represented by that collection of sinc() waves.





        Now, it gets even weirder than what TimWestcott was alluding to — the samples do not even have to be uniformly spaced in time! It turns out that ANY N unique samples taken within a window of time (with certain limitations) of a perfectly bandlimited signal can be used to reconstruct that signal. It takes a lot more math to do it, though!



        With nonuniform sampling, you are no longer getting a clean measurement of just one of the sinc() amplitudes. Instead, you're getting a mix of many, if not all of them. However, since you know exactly where you are on each one (obviously, each sample must be time-stamped), it is possible to solve the large system of linear equations to find the actual amplitudes and therefore reconstruct the original signal. Of course, this process is very sensitive to small perturbations (noise and math errors, for example), and I'm hand-waving away some details about constraints on the set of samples, but the general principle holds.






        share|improve this answer









        $endgroup$



        You can think of any perfectly bandlimited signal as the superposition of a set of $frac{sin(t)}{t} = text{sinc}(t)$ curves, with their peaks positioned uniformly along the time axis. Their spacing is $frac{2}{BW}$.



        sinc(x) also happens to be the time-domain response of a perfect low-pass filter, and it explains how the continuous-time reconstruction (interpolation) is accomplished from a series of discrete samples.



        When we uniformly sample a signal, each sample is a direct measurement of the amplitude of one of those sinc() waves. This works because it is a property of the sinc() function that it is zero at every sampling point, except at its own peak. In other words, when you take a measurement, you're not getting any "interference" from any of the other sinc() functions. Therefore, the set of N discrete measurements contains all of the information in the continuous-time signal represented by that collection of sinc() waves.





        Now, it gets even weirder than what TimWestcott was alluding to — the samples do not even have to be uniformly spaced in time! It turns out that ANY N unique samples taken within a window of time (with certain limitations) of a perfectly bandlimited signal can be used to reconstruct that signal. It takes a lot more math to do it, though!



        With nonuniform sampling, you are no longer getting a clean measurement of just one of the sinc() amplitudes. Instead, you're getting a mix of many, if not all of them. However, since you know exactly where you are on each one (obviously, each sample must be time-stamped), it is possible to solve the large system of linear equations to find the actual amplitudes and therefore reconstruct the original signal. Of course, this process is very sensitive to small perturbations (noise and math errors, for example), and I'm hand-waving away some details about constraints on the set of samples, but the general principle holds.







        share|improve this answer












        share|improve this answer



        share|improve this answer










        answered 3 hours ago









        Dave TweedDave Tweed

        122k9152264




        122k9152264

























            0












            $begingroup$

            If the signal is perfectly bandlimited, then there is no additional information to be gotten out of it by sampling faster than twice the bandwidth. So perfect reconstruction must be possible. It's as @DanMills said: there's one and only one curve that'll pass through the sampled points and be correct, and that's the curve that you'd get from a perfect reconstruction filter.



            (Note that it gets weirder -- at least in theory, if the bandwidth is $B$, then you don't need to sample $x(t)$ at $2B$ -- you can sample $x(t)$ and $frac{d x(t)}{dt}$ simultaneously at $B$, or sample out to the third derivative (i.e., collect four samples) at $frac{B}{2}$, or commit various other crimes to the signal before sampling an $N$ wide vector at $frac{2B}{N}$. Most such schemes (definitely the derivatives that I mention) would be horribly impractical, but in theory they'll work, and you do occasionally stumble across schemes that are actually used in reality.)






            share|improve this answer









            $endgroup$













            • $begingroup$
              Why band - limiting means there is one e only one curves that will pass through the sampled points?
              $endgroup$
              – Kinka-Byo
              19 mins ago
















            0












            $begingroup$

            If the signal is perfectly bandlimited, then there is no additional information to be gotten out of it by sampling faster than twice the bandwidth. So perfect reconstruction must be possible. It's as @DanMills said: there's one and only one curve that'll pass through the sampled points and be correct, and that's the curve that you'd get from a perfect reconstruction filter.



            (Note that it gets weirder -- at least in theory, if the bandwidth is $B$, then you don't need to sample $x(t)$ at $2B$ -- you can sample $x(t)$ and $frac{d x(t)}{dt}$ simultaneously at $B$, or sample out to the third derivative (i.e., collect four samples) at $frac{B}{2}$, or commit various other crimes to the signal before sampling an $N$ wide vector at $frac{2B}{N}$. Most such schemes (definitely the derivatives that I mention) would be horribly impractical, but in theory they'll work, and you do occasionally stumble across schemes that are actually used in reality.)






            share|improve this answer









            $endgroup$













            • $begingroup$
              Why band - limiting means there is one e only one curves that will pass through the sampled points?
              $endgroup$
              – Kinka-Byo
              19 mins ago














            0












            0








            0





            $begingroup$

            If the signal is perfectly bandlimited, then there is no additional information to be gotten out of it by sampling faster than twice the bandwidth. So perfect reconstruction must be possible. It's as @DanMills said: there's one and only one curve that'll pass through the sampled points and be correct, and that's the curve that you'd get from a perfect reconstruction filter.



            (Note that it gets weirder -- at least in theory, if the bandwidth is $B$, then you don't need to sample $x(t)$ at $2B$ -- you can sample $x(t)$ and $frac{d x(t)}{dt}$ simultaneously at $B$, or sample out to the third derivative (i.e., collect four samples) at $frac{B}{2}$, or commit various other crimes to the signal before sampling an $N$ wide vector at $frac{2B}{N}$. Most such schemes (definitely the derivatives that I mention) would be horribly impractical, but in theory they'll work, and you do occasionally stumble across schemes that are actually used in reality.)






            share|improve this answer









            $endgroup$



            If the signal is perfectly bandlimited, then there is no additional information to be gotten out of it by sampling faster than twice the bandwidth. So perfect reconstruction must be possible. It's as @DanMills said: there's one and only one curve that'll pass through the sampled points and be correct, and that's the curve that you'd get from a perfect reconstruction filter.



            (Note that it gets weirder -- at least in theory, if the bandwidth is $B$, then you don't need to sample $x(t)$ at $2B$ -- you can sample $x(t)$ and $frac{d x(t)}{dt}$ simultaneously at $B$, or sample out to the third derivative (i.e., collect four samples) at $frac{B}{2}$, or commit various other crimes to the signal before sampling an $N$ wide vector at $frac{2B}{N}$. Most such schemes (definitely the derivatives that I mention) would be horribly impractical, but in theory they'll work, and you do occasionally stumble across schemes that are actually used in reality.)







            share|improve this answer












            share|improve this answer



            share|improve this answer










            answered 4 hours ago









            TimWescottTimWescott

            6,3631416




            6,3631416












            • $begingroup$
              Why band - limiting means there is one e only one curves that will pass through the sampled points?
              $endgroup$
              – Kinka-Byo
              19 mins ago


















            • $begingroup$
              Why band - limiting means there is one e only one curves that will pass through the sampled points?
              $endgroup$
              – Kinka-Byo
              19 mins ago
















            $begingroup$
            Why band - limiting means there is one e only one curves that will pass through the sampled points?
            $endgroup$
            – Kinka-Byo
            19 mins ago




            $begingroup$
            Why band - limiting means there is one e only one curves that will pass through the sampled points?
            $endgroup$
            – Kinka-Byo
            19 mins ago


















            draft saved

            draft discarded




















































            Thanks for contributing an answer to Electrical Engineering Stack Exchange!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            Use MathJax to format equations. MathJax reference.


            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f428871%2fsampling-theorem-and-reconstruction%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            Popular posts from this blog

            “%fieldName is a required field.”, in Magento2 REST API Call for GET Method Type The Next...

            How to change City field to a dropdown in Checkout step Magento 2Magento 2 : How to change UI field(s)...

            變成蝙蝠會怎樣? 參考資料 外部連結 导航菜单Thomas Nagel, "What is it like to be a...