When a wind turbine does not produce enough electricity how does the power company compensate for the...

Outlet with 3 sets of wires

Professor forcing me to attend a conference, I can't afford even with 50% funding

Proving a statement about real numbers

Does "Until when" sound natural for native speakers?

After `ssh` without `-X` to a machine, is it possible to change `$DISPLAY` to make it work like `ssh -X`?

Why does Solve lock up when trying to solve the quadratic equation with large integers?

Gaining more land

Was it really inappropriate to write a pull request for the company I interviewed with?

Is a piano played in the same way as a harmonium?

For which categories of spectra is there an explicit description of the fibrant objects via lifting properties?

Does a difference of tense count as a difference of meaning in a minimal pair?

Is it possible to find 2014 distinct positive integers whose sum is divisible by each of them?

What materials can be used to make a humanoid skin warm?

What is the population of Romulus in the TNG era?

Are all players supposed to be able to see each others' character sheets?

What is Tony Stark injecting into himself in Iron Man 3?

Does Christianity allow for believing on someone else's behalf?

How to resolve: Reviewer #1 says remove section X vs. Reviewer #2 says expand section X

How exactly does an Ethernet collision happen in the cable, since nodes use different circuits for Tx and Rx?

MySQL importing CSV files really slow

Do I really need to have a scientific explanation for my premise?

Can the alpha, lambda values of a glmnet object output determine whether ridge or Lasso?

Making a kiddush for a girl that has hard time finding shidduch

Should I take out a loan for a friend to invest on my behalf?



When a wind turbine does not produce enough electricity how does the power company compensate for the loss?


How precise is the frequency of the AC electricity network?How exactly does the grid handle small deviations in power consumption?How do I, as a consumer, gain or lose when the utility company line voltage varies from rated value?Does using “High Leg Delta” 3-phase electricity require a different equation for calculating Amperage/Power?Can I use offline UPS for a PC? Will the delay affect my PC if it is running when the power goes out?How is electricity from a power station added to the grid?Why does a wind turbine deliver reactive power to the grid during no winds or when turbine is stopped?Why maximum power transfer condition is suitable for communication system but not for transmission of electricity?













1












$begingroup$


I heard once that when a wind turbine power plant doesn't produce enough electricity the power company's are sometimes forced to turn on a couple of jet engines in order to compensate for the loss, is there any truth to that? I imagine stability is a key factor in keeping the production static and efficient, so what would the power company do?










share|improve this question







New contributor




Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$

















    1












    $begingroup$


    I heard once that when a wind turbine power plant doesn't produce enough electricity the power company's are sometimes forced to turn on a couple of jet engines in order to compensate for the loss, is there any truth to that? I imagine stability is a key factor in keeping the production static and efficient, so what would the power company do?










    share|improve this question







    New contributor




    Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
    Check out our Code of Conduct.







    $endgroup$















      1












      1








      1





      $begingroup$


      I heard once that when a wind turbine power plant doesn't produce enough electricity the power company's are sometimes forced to turn on a couple of jet engines in order to compensate for the loss, is there any truth to that? I imagine stability is a key factor in keeping the production static and efficient, so what would the power company do?










      share|improve this question







      New contributor




      Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.







      $endgroup$




      I heard once that when a wind turbine power plant doesn't produce enough electricity the power company's are sometimes forced to turn on a couple of jet engines in order to compensate for the loss, is there any truth to that? I imagine stability is a key factor in keeping the production static and efficient, so what would the power company do?







      power-engineering power-grid






      share|improve this question







      New contributor




      Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.











      share|improve this question







      New contributor




      Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      share|improve this question




      share|improve this question






      New contributor




      Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      asked 39 mins ago









      RobRob

      1092




      1092




      New contributor




      Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.





      New contributor





      Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






      Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






















          2 Answers
          2






          active

          oldest

          votes


















          3












          $begingroup$

          This is correct. When the demand exceeds supply, voltage will sag and frequency will drop (which can risk equipment failure and is certainly an undesirable situation). The operators of power grids will turn on alternative sources of generation in order to correct the imbalance as soon as it is noticed (often under the coordination of a regional transmission organization such as CAISO).



          Grid operators are very careful to ensure that the grid frequency is properly maintained (source); even a few seconds of drift (i.e. a few hundred cycles ahead or behind) require RTOs and related agencies to take corrective action where safe.



          In order to understand the mix of energy a bit more thoroughly, it's necessary to take into account the types of generation, which include base-load plants, load-following plants, intermittent sources, and peaker plants:




          • Base-load plants are designed to operate at high efficiency, but cannot be adjusted quickly. Examples of these may include large coal and nuclear base load.

          • Load-following plants can adjust if they have capacity (e.g. hydroelectric or smaller fuel-burning plants)

          • Peaker plants are agile and can be brought online quickly (e.g. gas turbines), but are inefficient. When the base-load plants are insufficient, load-following plants increase their load; if this capacity is exhausted or the grid is experiencing rapid swings in load that the load-following plants cannot keep up with, then peakers will come online and begin burning fuel to achieve enough supply to balance the demand.


          Another factor to consider is planning: If an area has consistent winds and enough wind turbines, the wind can be considered part of base-load: It cannot be adjusted, but is relatively predictable and consistent day-to-day. Gaps in the wind are treated the same way as any other shortfall of base-load: first via load-following plants if possible and then with the help of the peakers.



          Known gaps and shortfalls can also be handled through trading. For example, Washington State, US has abundant hydroelectric power, and exports energy to fourteen other states. Its overproduction of energy (which can itself be as harmful as underproduction) is usefully diverted to help make up some of the supply of neighboring states such as California (source). This export includes base-load if the local demand is dropping too quickly for the operating power plants to adjust.



          Stored energy also makes a contribution. The sources for such extra energy may be storage sites such as pumped energy storage, batteries (e.g. this), or they may be generation (not necessarily burning fuel).



          Lastly, load-shedding is a last-resort. If conditions are adverse (very high demand such as air-conditioning on a hot day, transmission line failures, loss of base-load, etc) then the grid operator may increase the real-time price of industrial energy, or even require that industrial grid users curtail their demand to avoid grid instability. If this is insufficient then blackouts and brownouts will occur, to prevent the total loss of the grid and its most critical users (hospitals, emergency services, communications).






          share|improve this answer











          $endgroup$













          • $begingroup$
            That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
            $endgroup$
            – Joe Fala
            15 mins ago










          • $begingroup$
            @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
            $endgroup$
            – Andrey Akhmetov
            14 mins ago










          • $begingroup$
            Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
            $endgroup$
            – Joe Fala
            7 mins ago










          • $begingroup$
            J-Power's unit 2 ultrasupercritical(mouthfull) in Japan is 45%
            $endgroup$
            – Joe Fala
            1 min ago



















          2












          $begingroup$

          I was going to scold you for not doing a search -- then couldn't find a decent answer! So -- here's a short answer:



          First, jet engines -- no. You're thinking of gas turbines, but they are not jet engines (try a web search on "Gas Turbine").



          Second, there's not a lot of energy storage on the electrical grid, aside from tanks of gas, piles of coal, uranium rods, and water behind dams. Batteries are starting to look like maybe they'll be practical, eventually. But by and large, when "alternative" energy sources poop out, there needs to be a "traditional" energy source that kicks in. Gas turbines are good for this because they can be brought on line quickly.



          This wiki article goes into the grid storage issue.






          share|improve this answer









          $endgroup$













            Your Answer





            StackExchange.ifUsing("editor", function () {
            return StackExchange.using("mathjaxEditing", function () {
            StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
            StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
            });
            });
            }, "mathjax-editing");

            StackExchange.ifUsing("editor", function () {
            return StackExchange.using("schematics", function () {
            StackExchange.schematics.init();
            });
            }, "cicuitlab");

            StackExchange.ready(function() {
            var channelOptions = {
            tags: "".split(" "),
            id: "135"
            };
            initTagRenderer("".split(" "), "".split(" "), channelOptions);

            StackExchange.using("externalEditor", function() {
            // Have to fire editor after snippets, if snippets enabled
            if (StackExchange.settings.snippets.snippetsEnabled) {
            StackExchange.using("snippets", function() {
            createEditor();
            });
            }
            else {
            createEditor();
            }
            });

            function createEditor() {
            StackExchange.prepareEditor({
            heartbeatType: 'answer',
            autoActivateHeartbeat: false,
            convertImagesToLinks: false,
            noModals: true,
            showLowRepImageUploadWarning: true,
            reputationToPostImages: null,
            bindNavPrevention: true,
            postfix: "",
            imageUploader: {
            brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
            contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
            allowUrls: true
            },
            onDemand: true,
            discardSelector: ".discard-answer"
            ,immediatelyShowMarkdownHelp:true
            });


            }
            });






            Rob is a new contributor. Be nice, and check out our Code of Conduct.










            draft saved

            draft discarded


















            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f426616%2fwhen-a-wind-turbine-does-not-produce-enough-electricity-how-does-the-power-compa%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown

























            2 Answers
            2






            active

            oldest

            votes








            2 Answers
            2






            active

            oldest

            votes









            active

            oldest

            votes






            active

            oldest

            votes









            3












            $begingroup$

            This is correct. When the demand exceeds supply, voltage will sag and frequency will drop (which can risk equipment failure and is certainly an undesirable situation). The operators of power grids will turn on alternative sources of generation in order to correct the imbalance as soon as it is noticed (often under the coordination of a regional transmission organization such as CAISO).



            Grid operators are very careful to ensure that the grid frequency is properly maintained (source); even a few seconds of drift (i.e. a few hundred cycles ahead or behind) require RTOs and related agencies to take corrective action where safe.



            In order to understand the mix of energy a bit more thoroughly, it's necessary to take into account the types of generation, which include base-load plants, load-following plants, intermittent sources, and peaker plants:




            • Base-load plants are designed to operate at high efficiency, but cannot be adjusted quickly. Examples of these may include large coal and nuclear base load.

            • Load-following plants can adjust if they have capacity (e.g. hydroelectric or smaller fuel-burning plants)

            • Peaker plants are agile and can be brought online quickly (e.g. gas turbines), but are inefficient. When the base-load plants are insufficient, load-following plants increase their load; if this capacity is exhausted or the grid is experiencing rapid swings in load that the load-following plants cannot keep up with, then peakers will come online and begin burning fuel to achieve enough supply to balance the demand.


            Another factor to consider is planning: If an area has consistent winds and enough wind turbines, the wind can be considered part of base-load: It cannot be adjusted, but is relatively predictable and consistent day-to-day. Gaps in the wind are treated the same way as any other shortfall of base-load: first via load-following plants if possible and then with the help of the peakers.



            Known gaps and shortfalls can also be handled through trading. For example, Washington State, US has abundant hydroelectric power, and exports energy to fourteen other states. Its overproduction of energy (which can itself be as harmful as underproduction) is usefully diverted to help make up some of the supply of neighboring states such as California (source). This export includes base-load if the local demand is dropping too quickly for the operating power plants to adjust.



            Stored energy also makes a contribution. The sources for such extra energy may be storage sites such as pumped energy storage, batteries (e.g. this), or they may be generation (not necessarily burning fuel).



            Lastly, load-shedding is a last-resort. If conditions are adverse (very high demand such as air-conditioning on a hot day, transmission line failures, loss of base-load, etc) then the grid operator may increase the real-time price of industrial energy, or even require that industrial grid users curtail their demand to avoid grid instability. If this is insufficient then blackouts and brownouts will occur, to prevent the total loss of the grid and its most critical users (hospitals, emergency services, communications).






            share|improve this answer











            $endgroup$













            • $begingroup$
              That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
              $endgroup$
              – Joe Fala
              15 mins ago










            • $begingroup$
              @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
              $endgroup$
              – Andrey Akhmetov
              14 mins ago










            • $begingroup$
              Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
              $endgroup$
              – Joe Fala
              7 mins ago










            • $begingroup$
              J-Power's unit 2 ultrasupercritical(mouthfull) in Japan is 45%
              $endgroup$
              – Joe Fala
              1 min ago
















            3












            $begingroup$

            This is correct. When the demand exceeds supply, voltage will sag and frequency will drop (which can risk equipment failure and is certainly an undesirable situation). The operators of power grids will turn on alternative sources of generation in order to correct the imbalance as soon as it is noticed (often under the coordination of a regional transmission organization such as CAISO).



            Grid operators are very careful to ensure that the grid frequency is properly maintained (source); even a few seconds of drift (i.e. a few hundred cycles ahead or behind) require RTOs and related agencies to take corrective action where safe.



            In order to understand the mix of energy a bit more thoroughly, it's necessary to take into account the types of generation, which include base-load plants, load-following plants, intermittent sources, and peaker plants:




            • Base-load plants are designed to operate at high efficiency, but cannot be adjusted quickly. Examples of these may include large coal and nuclear base load.

            • Load-following plants can adjust if they have capacity (e.g. hydroelectric or smaller fuel-burning plants)

            • Peaker plants are agile and can be brought online quickly (e.g. gas turbines), but are inefficient. When the base-load plants are insufficient, load-following plants increase their load; if this capacity is exhausted or the grid is experiencing rapid swings in load that the load-following plants cannot keep up with, then peakers will come online and begin burning fuel to achieve enough supply to balance the demand.


            Another factor to consider is planning: If an area has consistent winds and enough wind turbines, the wind can be considered part of base-load: It cannot be adjusted, but is relatively predictable and consistent day-to-day. Gaps in the wind are treated the same way as any other shortfall of base-load: first via load-following plants if possible and then with the help of the peakers.



            Known gaps and shortfalls can also be handled through trading. For example, Washington State, US has abundant hydroelectric power, and exports energy to fourteen other states. Its overproduction of energy (which can itself be as harmful as underproduction) is usefully diverted to help make up some of the supply of neighboring states such as California (source). This export includes base-load if the local demand is dropping too quickly for the operating power plants to adjust.



            Stored energy also makes a contribution. The sources for such extra energy may be storage sites such as pumped energy storage, batteries (e.g. this), or they may be generation (not necessarily burning fuel).



            Lastly, load-shedding is a last-resort. If conditions are adverse (very high demand such as air-conditioning on a hot day, transmission line failures, loss of base-load, etc) then the grid operator may increase the real-time price of industrial energy, or even require that industrial grid users curtail their demand to avoid grid instability. If this is insufficient then blackouts and brownouts will occur, to prevent the total loss of the grid and its most critical users (hospitals, emergency services, communications).






            share|improve this answer











            $endgroup$













            • $begingroup$
              That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
              $endgroup$
              – Joe Fala
              15 mins ago










            • $begingroup$
              @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
              $endgroup$
              – Andrey Akhmetov
              14 mins ago










            • $begingroup$
              Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
              $endgroup$
              – Joe Fala
              7 mins ago










            • $begingroup$
              J-Power's unit 2 ultrasupercritical(mouthfull) in Japan is 45%
              $endgroup$
              – Joe Fala
              1 min ago














            3












            3








            3





            $begingroup$

            This is correct. When the demand exceeds supply, voltage will sag and frequency will drop (which can risk equipment failure and is certainly an undesirable situation). The operators of power grids will turn on alternative sources of generation in order to correct the imbalance as soon as it is noticed (often under the coordination of a regional transmission organization such as CAISO).



            Grid operators are very careful to ensure that the grid frequency is properly maintained (source); even a few seconds of drift (i.e. a few hundred cycles ahead or behind) require RTOs and related agencies to take corrective action where safe.



            In order to understand the mix of energy a bit more thoroughly, it's necessary to take into account the types of generation, which include base-load plants, load-following plants, intermittent sources, and peaker plants:




            • Base-load plants are designed to operate at high efficiency, but cannot be adjusted quickly. Examples of these may include large coal and nuclear base load.

            • Load-following plants can adjust if they have capacity (e.g. hydroelectric or smaller fuel-burning plants)

            • Peaker plants are agile and can be brought online quickly (e.g. gas turbines), but are inefficient. When the base-load plants are insufficient, load-following plants increase their load; if this capacity is exhausted or the grid is experiencing rapid swings in load that the load-following plants cannot keep up with, then peakers will come online and begin burning fuel to achieve enough supply to balance the demand.


            Another factor to consider is planning: If an area has consistent winds and enough wind turbines, the wind can be considered part of base-load: It cannot be adjusted, but is relatively predictable and consistent day-to-day. Gaps in the wind are treated the same way as any other shortfall of base-load: first via load-following plants if possible and then with the help of the peakers.



            Known gaps and shortfalls can also be handled through trading. For example, Washington State, US has abundant hydroelectric power, and exports energy to fourteen other states. Its overproduction of energy (which can itself be as harmful as underproduction) is usefully diverted to help make up some of the supply of neighboring states such as California (source). This export includes base-load if the local demand is dropping too quickly for the operating power plants to adjust.



            Stored energy also makes a contribution. The sources for such extra energy may be storage sites such as pumped energy storage, batteries (e.g. this), or they may be generation (not necessarily burning fuel).



            Lastly, load-shedding is a last-resort. If conditions are adverse (very high demand such as air-conditioning on a hot day, transmission line failures, loss of base-load, etc) then the grid operator may increase the real-time price of industrial energy, or even require that industrial grid users curtail their demand to avoid grid instability. If this is insufficient then blackouts and brownouts will occur, to prevent the total loss of the grid and its most critical users (hospitals, emergency services, communications).






            share|improve this answer











            $endgroup$



            This is correct. When the demand exceeds supply, voltage will sag and frequency will drop (which can risk equipment failure and is certainly an undesirable situation). The operators of power grids will turn on alternative sources of generation in order to correct the imbalance as soon as it is noticed (often under the coordination of a regional transmission organization such as CAISO).



            Grid operators are very careful to ensure that the grid frequency is properly maintained (source); even a few seconds of drift (i.e. a few hundred cycles ahead or behind) require RTOs and related agencies to take corrective action where safe.



            In order to understand the mix of energy a bit more thoroughly, it's necessary to take into account the types of generation, which include base-load plants, load-following plants, intermittent sources, and peaker plants:




            • Base-load plants are designed to operate at high efficiency, but cannot be adjusted quickly. Examples of these may include large coal and nuclear base load.

            • Load-following plants can adjust if they have capacity (e.g. hydroelectric or smaller fuel-burning plants)

            • Peaker plants are agile and can be brought online quickly (e.g. gas turbines), but are inefficient. When the base-load plants are insufficient, load-following plants increase their load; if this capacity is exhausted or the grid is experiencing rapid swings in load that the load-following plants cannot keep up with, then peakers will come online and begin burning fuel to achieve enough supply to balance the demand.


            Another factor to consider is planning: If an area has consistent winds and enough wind turbines, the wind can be considered part of base-load: It cannot be adjusted, but is relatively predictable and consistent day-to-day. Gaps in the wind are treated the same way as any other shortfall of base-load: first via load-following plants if possible and then with the help of the peakers.



            Known gaps and shortfalls can also be handled through trading. For example, Washington State, US has abundant hydroelectric power, and exports energy to fourteen other states. Its overproduction of energy (which can itself be as harmful as underproduction) is usefully diverted to help make up some of the supply of neighboring states such as California (source). This export includes base-load if the local demand is dropping too quickly for the operating power plants to adjust.



            Stored energy also makes a contribution. The sources for such extra energy may be storage sites such as pumped energy storage, batteries (e.g. this), or they may be generation (not necessarily burning fuel).



            Lastly, load-shedding is a last-resort. If conditions are adverse (very high demand such as air-conditioning on a hot day, transmission line failures, loss of base-load, etc) then the grid operator may increase the real-time price of industrial energy, or even require that industrial grid users curtail their demand to avoid grid instability. If this is insufficient then blackouts and brownouts will occur, to prevent the total loss of the grid and its most critical users (hospitals, emergency services, communications).







            share|improve this answer














            share|improve this answer



            share|improve this answer








            edited 13 mins ago

























            answered 29 mins ago









            Andrey AkhmetovAndrey Akhmetov

            1,058722




            1,058722












            • $begingroup$
              That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
              $endgroup$
              – Joe Fala
              15 mins ago










            • $begingroup$
              @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
              $endgroup$
              – Andrey Akhmetov
              14 mins ago










            • $begingroup$
              Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
              $endgroup$
              – Joe Fala
              7 mins ago










            • $begingroup$
              J-Power's unit 2 ultrasupercritical(mouthfull) in Japan is 45%
              $endgroup$
              – Joe Fala
              1 min ago


















            • $begingroup$
              That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
              $endgroup$
              – Joe Fala
              15 mins ago










            • $begingroup$
              @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
              $endgroup$
              – Andrey Akhmetov
              14 mins ago










            • $begingroup$
              Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
              $endgroup$
              – Joe Fala
              7 mins ago










            • $begingroup$
              J-Power's unit 2 ultrasupercritical(mouthfull) in Japan is 45%
              $endgroup$
              – Joe Fala
              1 min ago
















            $begingroup$
            That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
            $endgroup$
            – Joe Fala
            15 mins ago




            $begingroup$
            That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
            $endgroup$
            – Joe Fala
            15 mins ago












            $begingroup$
            @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
            $endgroup$
            – Andrey Akhmetov
            14 mins ago




            $begingroup$
            @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
            $endgroup$
            – Andrey Akhmetov
            14 mins ago












            $begingroup$
            Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
            $endgroup$
            – Joe Fala
            7 mins ago




            $begingroup$
            Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
            $endgroup$
            – Joe Fala
            7 mins ago












            $begingroup$
            J-Power's unit 2 ultrasupercritical(mouthfull) in Japan is 45%
            $endgroup$
            – Joe Fala
            1 min ago




            $begingroup$
            J-Power's unit 2 ultrasupercritical(mouthfull) in Japan is 45%
            $endgroup$
            – Joe Fala
            1 min ago













            2












            $begingroup$

            I was going to scold you for not doing a search -- then couldn't find a decent answer! So -- here's a short answer:



            First, jet engines -- no. You're thinking of gas turbines, but they are not jet engines (try a web search on "Gas Turbine").



            Second, there's not a lot of energy storage on the electrical grid, aside from tanks of gas, piles of coal, uranium rods, and water behind dams. Batteries are starting to look like maybe they'll be practical, eventually. But by and large, when "alternative" energy sources poop out, there needs to be a "traditional" energy source that kicks in. Gas turbines are good for this because they can be brought on line quickly.



            This wiki article goes into the grid storage issue.






            share|improve this answer









            $endgroup$


















              2












              $begingroup$

              I was going to scold you for not doing a search -- then couldn't find a decent answer! So -- here's a short answer:



              First, jet engines -- no. You're thinking of gas turbines, but they are not jet engines (try a web search on "Gas Turbine").



              Second, there's not a lot of energy storage on the electrical grid, aside from tanks of gas, piles of coal, uranium rods, and water behind dams. Batteries are starting to look like maybe they'll be practical, eventually. But by and large, when "alternative" energy sources poop out, there needs to be a "traditional" energy source that kicks in. Gas turbines are good for this because they can be brought on line quickly.



              This wiki article goes into the grid storage issue.






              share|improve this answer









              $endgroup$
















                2












                2








                2





                $begingroup$

                I was going to scold you for not doing a search -- then couldn't find a decent answer! So -- here's a short answer:



                First, jet engines -- no. You're thinking of gas turbines, but they are not jet engines (try a web search on "Gas Turbine").



                Second, there's not a lot of energy storage on the electrical grid, aside from tanks of gas, piles of coal, uranium rods, and water behind dams. Batteries are starting to look like maybe they'll be practical, eventually. But by and large, when "alternative" energy sources poop out, there needs to be a "traditional" energy source that kicks in. Gas turbines are good for this because they can be brought on line quickly.



                This wiki article goes into the grid storage issue.






                share|improve this answer









                $endgroup$



                I was going to scold you for not doing a search -- then couldn't find a decent answer! So -- here's a short answer:



                First, jet engines -- no. You're thinking of gas turbines, but they are not jet engines (try a web search on "Gas Turbine").



                Second, there's not a lot of energy storage on the electrical grid, aside from tanks of gas, piles of coal, uranium rods, and water behind dams. Batteries are starting to look like maybe they'll be practical, eventually. But by and large, when "alternative" energy sources poop out, there needs to be a "traditional" energy source that kicks in. Gas turbines are good for this because they can be brought on line quickly.



                This wiki article goes into the grid storage issue.







                share|improve this answer












                share|improve this answer



                share|improve this answer










                answered 30 mins ago









                TimWescottTimWescott

                5,6841414




                5,6841414






















                    Rob is a new contributor. Be nice, and check out our Code of Conduct.










                    draft saved

                    draft discarded


















                    Rob is a new contributor. Be nice, and check out our Code of Conduct.













                    Rob is a new contributor. Be nice, and check out our Code of Conduct.












                    Rob is a new contributor. Be nice, and check out our Code of Conduct.
















                    Thanks for contributing an answer to Electrical Engineering Stack Exchange!


                    • Please be sure to answer the question. Provide details and share your research!

                    But avoid



                    • Asking for help, clarification, or responding to other answers.

                    • Making statements based on opinion; back them up with references or personal experience.


                    Use MathJax to format equations. MathJax reference.


                    To learn more, see our tips on writing great answers.




                    draft saved


                    draft discarded














                    StackExchange.ready(
                    function () {
                    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f426616%2fwhen-a-wind-turbine-does-not-produce-enough-electricity-how-does-the-power-compa%23new-answer', 'question_page');
                    }
                    );

                    Post as a guest















                    Required, but never shown





















































                    Required, but never shown














                    Required, but never shown












                    Required, but never shown







                    Required, but never shown

































                    Required, but never shown














                    Required, but never shown












                    Required, but never shown







                    Required, but never shown







                    Popular posts from this blog

                    “%fieldName is a required field.”, in Magento2 REST API Call for GET Method Type The Next...

                    How to change City field to a dropdown in Checkout step Magento 2Magento 2 : How to change UI field(s)...

                    變成蝙蝠會怎樣? 參考資料 外部連結 导航菜单Thomas Nagel, "What is it like to be a...